Hypertherm MAX200 Machine Torch Plasma Arc Cutting System - Manual (Page 147)

6-28 MAX200 Instruction Manual
15
PARTS LIST
Machine Torch Lead Assemblies (continued)
Note: Hypertherm does not recommend using torch leads longer than 75 Feet. 100 Ft, 125 Ft. and
150 Ft. leads will cause problems with starting.
Part
Item
Number Description Qty.
028782 Shield Torch Lead, 125 Ft. 1
1 023809 Lead Pilot, Shield Gas, 125 Ft. (blue) 1
2 024417 Lead, Plasma Gas, 125 Ft. (red) 1
3 024414 Lead, Cap Sensor, 125 Ft. (gray) 1
4 023806 Cable, Water Cooled, 125 Ft. (blue- red band) 1
5 023806 Cable, Water Cooled, 125 Ft. (blue- green band) 1
6 020536 Lead Insulator, 9/16" ID x 2-1/2" 1
7 046026 Tubing, 1-1/2" ID Shrink Black 1
8 046061 2" ID Tinned Braid 1
9 027015 Ring Compress, Shield Torch Lead 1
10 004080 Collar, Shield Torch Leads 1
11 015090 Clamp, Hose, 1-5/16 - 2-1/4 1
028783 Shield Torch Lead, 150 Ft. 1
1 023810 Lead Pilot, Shield Gas, 150 Ft. (blue) 1
2 024418 Lead, Plasma Gas, 150 Ft. (red) 1
3 024415 Lead, Cap Sensor, 150 Ft. (gray) 1
4 023807 Cable, Water Cooled, 150 Ft. (blue- red band) 1
5 023807 Cable, Water Cooled, 150 Ft. (blue- green band) 1
6 020536 Lead Insulator, 9/16" ID x 2-1/2" 1
7 046026 Tubing, 1-1/2" ID Shrink Black 1
8 046061 2" ID Tinned Braid 1
9 027015 Ring Compress, Shield Torch Lead 1
10 004080 Collar, Shield Torch Leads 1
11 015090 Clamp, Hose, 1-5/16 - 2-1/4 1
Figure 6-10 Machine Torch Lead Assemblies