Hypertherm MAX200 Machine Torch Plasma Arc Cutting System - Manual (Page 2)

1
Changed Page Description 800980 Rev 14 to 15
5/10/02
3.21 Added part numbers for cable lengths 25 ft-200 ft
3.27
Call-outs for ends of cable changed. Power supply end was 1X4, changed to 1X2. DR/PR end
was 5X1, changed to 5X2.
4.6 & 4.14 Added SilverPlus information. Electrode P/N 220083
4.10, 4.13,
4.19, 4.26,
4.31-4.46
Retaining cap part number changed from 120837 to 020423. Ohmic contact does not work with
40Amp,under water, beveling or gouging processes.
Sections 5
& 6
The maintenance section is now section 5 (was 6). Standard components is now the parts list,
section 6. This matches our other manuals.
6.2 Updated art. Old picture lost.
6.4 Updated art. Old picture lost.
6.10 Updated art to show current chopper. Renumbered call-outs.
6.11
Renumbered items. Removed references to obsolete chopper (P/N 029320). Removed art for
chopper # 129118 from bottom of page.
6.12 Updated art to show current chopper. Renumbered call-outs.
6.13
Renumbered items. Removed references to obsolete chopper (P/N 029320). Removed art for
chopper # 129118 from bottom of page.
6.15 Item # 14 corrected. Was 029618 now 129618.
6.16 Part # corrected. Filter, coolant, deionizing - was 027137 now 027005.
6.17
Part # corrected. Torch main body was 020470, changed to 120584. Removed revision
reference, it said revision 1 next to P/N in parentheses.
6.18
Retaining cap part number changed from 120837 to 020423. Ohmic contact does not work with
40Amp,under water, beveling or gouging processes.
6.19 Retaining cap part number 020423 and art added to cutting section.
6.20 & 6.22
Retaining cap part number changed from 120837 to 020423, For Consumable Parts Kit # 028429
(6.20) & machine torch assembly part # 128365.
Section
7/Wiring
diagrams
013179 drawings uprev'd from U to V. Sheet 9 of 9 is the only one that changed. Timing chart and
gas system designators updated. Format change (all pages) from 8.5X11" pages to 11X17" pages
folded to fit.
Changed Page Description 800980 Rev 13 to 14
5/01
4.11-4.41
Electrode part# change from 120667 to 220021. Cap part 3 changed from 020423 to 120837 (art
changed)
4.18, 25, 39,
43
Changed Electrode part# to 120547 (100A air/air)
5.7 Revised item 8 and 10 part numbers
5.9 Revised item 2 part number
5.13 Revised item 14 part number
5.15 Item # 14 P/N 029618 changed to 129618
5.18-5.23
Electrode part# change from 120667 to 220021. Cap part 3 changed from 020423 to 120837 (art
changed)
5.26 Part # correction 50' plasma gas lead was 024194 changed to 024195
5.27 & 28 Added note about extended leads causing start problems: not recommended