Install the water muffler option -41 – Hypertherm MAX200 Machine Torch Plasma Arc Cutting System User Manual
Page 65
Advertising
MAX200
Instruction Manual
3-41
14
SETUP
Install the Water Muffler Option
The Water Muffler option can be used with the 1.75 inch (44.5 mm) diameter torch bodies only. The 2 inch (51 mm)
diameter torch body can not support the Water Muffler option.
To install the Water Muffler option, refer to the MAX200 Water Muffler Instruction Manual IM-205 (P/N 802050).
Advertising
This manual is related to the following products: