Cutting techniques -7, Torch alignment -7 – Hypertherm MAX200 Machine Torch Plasma Arc Cutting System User Manual
Page 72
Advertising
MAX200
Instruction Manual
4-7
14
OPERATION
Cutting Techniques
Torch Alignment
Prior to cutting with a machine torch, ensure that the torch is at right angles to the workpiece to get a clean, vertical
cut. Use a square to align the torch. The torch should be aligned at 90° increments (0°, 90°, 180°, and 270°). See
Figure 4-2.
Figure 4-2
Torch Alignment
Advertising
This manual is related to the following products: