Hypertherm MAX200 Machine Torch Plasma Arc Cutting System - Manual (Page 30)

3-2 MAX200 Instruction Manual
14
SETUP
Upon Receipt
The MAX200 power supply is shipped mounted to a skid and protected by a heavy carton cover. Before unpacking
the unit, inspect the carton for evidence of damage during shipment.
1. Remove all packing material and discard and remove the power supply from the shipping skid.
2. Verify that the MAX200 torch standard system configuration items and parts listed below are included. Also,
ensure all the required options are included.
Alert your distributor if any of the items or parts are missing. All communications regarding this equipment must
include the model number and serial number (located on the back of the MAX200). See the Claims and
Technical Questions in this section for details.
MAX200 System – Machine Torch Configuration
• MAX200 Power Supply
• MAX200 machine torch and torch lead assembly
• 25-foot work cable (ground) with clamp
• Consumable spare parts kit
• Torch coolant – four gallons
• Instruction manual 800980
Options:
• Torch Height Control (THC)
• Remote Module
– Switch Remote (SR)
– Digital Remote (DR)
– Program Remote (PR)
• Initial Height Sensor (IHS)
• Remote Start/Stop Switch
• Water Muffler (refer to manual IM-97)