Teac MMR-16 v4.0 - Manual (Page 101)

MMP-16 TASCAM MMP-16 Owner’s Manual • Chapter 5 • MMP-16 Setup Menus 103
Important Rules for IP Addresses
It is important to make sure all host devices on the network have the same network IP addresses but have
unique host addresses within the network. Put simply, the first three bytes of the IP address should be the
same for all host machines on that network, and the final byte should set to a number which is unique
for each device on the network.
This rule is very important and bears repeating in another way – no two host devices on the same
network should have identical IP addresses. If the address of two host devices on the network are
identical, it may cause serious problems for the network, including causing the whole network to stop
working properly until the duplicate address problem is remedied.
If the MM series machine is to be used in a facility where IP addresses are managed by a network
administrator, that person should assign and log the IP addresses for each MM series machine and
ViewNet computer according to the address scheme for the facility. IP addresses for MM series machines
can always be changed by using MMR/MMP Setup menu 950.
980 Serial Number
This sets the time used by the system. Whenever a recording is made, the current date and time are used
to “time stamp” the recorded files.
990 Software Version
This sets the time used by the system. Whenever a recording is made, the current date and time are used
to “time stamp” the recorded files.
995 Load Software
This sets the time used by the system. Whenever a recording is made, the current date and time are used
to “time stamp” the recorded files.