Teac MMR-16 v4.0 - Manual (Page 146)

TASCAM MMP-16 Owner’s Manual • Appendix G • Macintosh Error Messages 148
Appendix G: Macintosh File System Error Messages
There are a number of possible file system errors that can occur when attempting to load a Macintosh
formatted disk drive. In this case, the top part of the display will be the standard display for the particular
mode or state of the MMR/MMP when the error occurred. Some of these messages are longer than the 20
character width of the LCD screen. In this case, to read the rest of the error message, press the right arrow
key to scroll the message. Here is a list of error messages that can be displayed by the MMR-8 or MMP-
16 and the cause of the error. If any of these error messages occur, check the drive on a Macintosh
computer by using a disk repair utility such as Norton Disk Doctor.
01234567890123456789 20 position LCD character positions
Standard State Display Top: (Mode Display)
Mac Disk at ID N has Errors,
set to Read-Only. Repair on
your Mac first please
Bottom: (Error Message)
Cause: MMR detects file system errors on Mac
SCSI target ID N while mounting
01234567890123456789 20 position LCD character positions
Standard State Display Top: (Mode Display)
MacOpen (exists) failure Bottom: (Error Message)
Cause: Error opening existing project file.
Record or playback.
01234567890123456789 20 position LCD character positions
Standard State Display Top: (Mode Display)
MacOpen (create) failure Bottom: (Error Message)
Cause: Error creating new project file.
01234567890123456789 20 position LCD character positions
Standard State Display Top: (Mode Display)
MacCommit Err: N Bottom: (Error Message where N is Mac error code)
Cause: Error while recording data. Record did not
complete. Possible file system errors.