Teac MMR-16 v4.0 - Manual (Page 43)

MMP-16 TASCAM MMP-16 Owner’s Manual • Chapter 3 • Keys and Status Displays 45
Mode This term is used to refer to the active Control mode selected by Setup menu 000
and to refer to the Track Select Mode which governs the behavior of the SEL keys.
It may also be used to refer to various operational modes such as Loop, Trim, or
Shift which change the meaning of other keys or controls as long as the mode is
active.
LCD Text To indicate the front panel LCD text, curly brackets are used to enclose the text.
(e.g., {X. 01:00:00,00}) A mono-spaced Courier font duplicates the
spacing and alphanumeric characters shown in the LCD. In the Normal state, the
top line of the LCD typically shows the current “play head” time code, while the
bottom line shows the entry (or other active) register time code. In Setup, Track,
Verify, or Error states, the two LCD lines will change to show various text
messages as indicated in the Functional Overview section of Chapter 2.