Teac MMR-16 v4.0 - Manual (Page 103)

MMP-16 TASCAM MMP-16 Owner’s Manual • Chapter 6 • File Format Support 105
Chapter 6 File Format Support
Show Project Format
The file format of any project available for loading on the MMR/MMP is indicated by a two letter code in
brackets at the end of the project name.
01234567890123456789 20 position LCD character positions
File Top: (File Item)
Rons Project [PT] Bottom: (Indicates Pro Tools project)
The codes used for currently supported file types are:
[PT] Pro Tools
[WF] WaveFrame
[AK] Akai
[DV] DEVA (Broadcast Wave)
[OM] OMF/SDII
[SS] Sonic Solutions
[FL] Fairlight
Show Track Format, Drive ID
Once a track has been loaded, pressing VIEW TRACK will show the name of the selected track followed
by brackets around a number which indicates the drive ID and format type of the track.
01234567890123456789 20 position LCD character positions
Track Contents: Top: (Track contents)
1 MMR Trk1_00837 [0,PT] Bottom: (Indicates drive ID and Format for track)
Formatting Macintosh Disks
The MMR-8 and MMP-16 cannot format disk drives as Macintosh HFS volumes, so a drive must first be
formatted as a Macintosh HFS volume using a Macintosh computer before the drive can be used with the
MMR-8 or MMP-16. If a non-Macintosh formatted drive is mounted, the MMR/MMP will not allow Pro
Tools or OMF as a choice for recording, backup, or file export to that disk. Users are advised to follow
the recommendations of Digidesign for formatting disk drives for use with the Pro Tools system and with
the MMR-8 and MMP-16.