Teac MMR-16 v4.0 - Manual (Page 96)

TASCAM MMP-16 Owner’s Manual • Chapter 5 • MMP-16 Setup Menus MMP-16 98
250 Slip Commit
The Track Slip function on the MMR/MMP works by changing the value of a track offset register. This
slip offset is volatile and will be cleared when a new Project or track is loaded. When a track slip is
committed using this setting, the amount of the slip for the selected track(s) is incorporated into an edit
operation which changes the track EDL to reflect the new timecode location for all audio events on the
track. This change is automatically saved to disk for WaveFrame and Pro Tools projects (not for other
formats since they cannot be saved to disk) and the EDL is immediately updated.
The Slip Commit menu allows for committing all tracks which have a slip offset, or of choosing only a
specific track. The default value is to commit all track slips.
300 Biphase
These settings are used to control the behavior of the system while in Biphase Chase control mode.
300 Biphase Frame Rate
Sets the frame rate used when the system is in Biphase Chase mode. Frame Rate choices are:
§ 24 Frames per second (default value)
§ 25 Frames per second
§ 30 Frames per second
301 Biphase Pulse Rate
Sets the frame rate used when the system is in Biphase Chase mode. Frame Rate choices are:
§ 2
Pulses per frame (ppf)
§ 4
ppf
§ 10
ppf (default value)
§ 20 ppf
§ 25
ppf
§ 50
ppf
§ 100 ppf
302 Biphase Input
Sets the type of Biphase input signal required for operation in Biphase mode. Choices are:
§ Biphase Input (default value)
§ Tach and Direction
§ Tach and Inverse Direction
400 Remote
These settings are used to control the behavior of the system while being remotely controlled by other
devices or controllers.
400 Editor Device
Sets the Sony 9-pin control personality while in the Edit control mode.