Teac MMR-16 v4.0 - Manual (Page 51)

MMP-16 TASCAM MMP-16 Owner’s Manual • Chapter 3 • Keys and Status Displays 53
Backup State Display
The Backup state is accessed via the Load Track state by choosing (scrolling to) the desired Project and then
pressing SHIFT + SLIP. There are six menu choices that can be displayed: Backup, Rename, TapeMode Convert,
WaveFrame Export, OMF Export, and ProTools Export. Use the Up/Down arrow keys or the Wheel to toggle
between the Backup types. Only currently mounted disk volumes will be shown as choices for the target of the
backup operation. Press CLR to cancel the Backup state and return to the Normal state.
Backup:
01234567890123456789 LCD character positions (left to right)
Begin Backup to: Top: (Menu Item)
*Disk X Bottom: (Drive SCSI ID #)
Rename:
01234567890123456789 LCD character positions (left to right)
Rename project as: Top: (Menu Item)
*Project Name Bottom:(shows project name)
TapeMode Convert:
01234567890123456789 LCD character positions (left to right)
TapeMode Convert to: Top: (Menu Item)
*Disk X Bottom: (Drive SCSI ID #)
WaveFrame Export:
01234567890123456789 20 position LCD character positions
WaveFrame Export to: Top: (Menu Item)
* Disk 0 Bottom: (Drive SCSI ID #)
OMF Export:
01234567890123456789 20 position LCD character positions
OMF Export to: Top: (Menu Item)
* Disk 0 Bottom: (Drive SCSI ID #)
Pro Tools Export:
.
01234567890123456789 20 position LCD character positions
ProTools Export to: Top: (Menu Item)
* Disk 0 Bottom: (Drive SCSI ID #)