Teac MMR-16 v4.0 - Manual (Page 41)

MMP-16 TASCAM MMP-16 Owner’s Manual • Chapter 2 • Installation 43
Factory Default Settings
The MMP-16 is shipped from the factory using a pre-defined set of operating parameters. The factory
default settings can be changed in the field at any time through a system of Setup menus that control the
MMP-16 operating parameters. The new value settings will be automatically saved and used at system
start-up as the normal operating parameters of the MMP-16. The system can be reset to use the factory
defaults at any time by accessing menu 901 (“Recall Settings”), and selecting the “Default” value. The
system will then be returned to the factory default settings and is ready to use.