Teac MMR-16 v4.0 - Manual (Page 70)

TASCAM MMP-16 Owner’s Manual • Chapter 4 • MMP-16 Operation MMP-16 72
TapeMode Convert
The TapeMode Convert process will copy the audio data to the drive specified and will “flatten” the EDL
so that each track consists of a single audio file. If the same TapeMode audio files already exist on the
target disk, they will not be copied again. The word _TAPE will be appended to the end of the file name
of the newly created tape mode backup file so that it can be distinguished from the original file name.
This is especially important if the backup is made to the same disk as the original file. The Convert to
TapeMode menu is accessed by pressing the Load Track key to find the file to be backed up, then
pressing Shift + Slip to access the Backup menus and then pressing the up/down arrow keys or wheel
until the TapeMode Convert menu appears:
01234567890123456789 20 position LCD character positions
TapeMode Convert to: Top: (Menu Item)
* Disk 0 Bottom: (Drive SCSI ID #)
Press the Trim key to select the SCSI ID number of the drive to which the file is to be TapeMode
Converted. Press the STO (YES) key to initiate the Backup process. The menu will ask if you are sure.
Press STO (YES) again to initiate the TapeMode Convert process, or CLR (CANCEL) to cancel the
process and return to the previous menu.
Export
The Export feature of the MMR-8 and MMP-16 allows files in one format to be exported as files of a
different format. There are three Export menus available, which allow exporting the chosen file as a
WaveFrame Project, OMF Composition with Sound Designer II audio media, or as a Pro Tools Session.
The Export menu is accessed by pressing the Load Track key to find the file to be exported, pressing Shift
+ Slip to access the Backup menus, and then pressing the up/down arrow keys or wheel until the
appropriate Export menu appears.
Press the Trim key to select the SCSI ID number of the drive to which the file is to be Exported. Press the
STO (YES) key to initiate the Export process. The menu will ask if you are sure. Press STO (YES) again
to initiate the Export process, or CLR (CANCEL) to cancel the process and return to the previous menu.
WaveFrame Export
Use this menu to Export an OMF Composition with Sound Designer II media to a WaveFrame formatted
disk as a WaveFrame Project with WaveFrame audio media. Pro Tools Sessions may not be exported as a
WaveFrame Project.
01234567890123456789 20 position LCD character positions
WaveFrame Export to: Top: (Menu Item)
* Disk 0 Bottom: (Drive SCSI ID #)