Teac MMR-16 v4.0 - Manual (Page 65)

MMP-16 TASCAM MMP-16 Owner’s Manual • Chapter 3 • Keys and Status Displays 67
LOC (LOCATE) This key causes the transport to locate to the active register (bottom line of the
display) time code. The time code may be from a recalled register, a captured value
or a value entered through the numeric keypad. An implicit (or automatic) locate to
certain registers is done when a SHIFT+ numeric key is pressed. A locate operation
always stops the transport if it is not stopped. There is no shifted function for this
key.