Teac MMR-16 v4.0 - Manual (Page 110)

TASCAM MMP-16 Owner’s Manual • Chapter 6 • File Format Support MMP-16 112
Disabling Pro Tools Volume Automation
Volume (gain) automation can only be disabled using a Pro Tools system – it cannot be disabled directly
on the MM series unit. To disable ProTools volume Automation:
•
Go to the Edit Window in Pro Tools
•
Press the "command" key (the one with the apple on it) and click on the volume automation
selector.
•
This will cause the volume selector to gray out as in Track 1.L below.
•
Gray out each audio track volume automation selector on which you desire to have volume
automation disabled.
•
Press save. The volume automation is disabled.
In the example above: Track1.L will not play back any volume automation moves on the MMR/MMP
while Track 1.R will.
Audio File Time Stamp Support
A time code “stamp” is saved as an attribute of all recorded files. This time code stamp represents the
time code location of the MMR unit when the recording was made. This data is now recorded as part of
the audio file data. This information will be retained when files are Backed Up, Converted, or Exported to
a different format. Many Digital Audio Workstations can use this information to place audio at its
recorded time code location for editing.