Teac HS-2000 - Manual (Page 100)

100
TASCAM HS-2000
11 – Internal settings
In this chapter, we explain the internal settings of the unit
in detail.
Menu screen
Press the MENU key on the front panel to open the
MENU
screen as shown below.
REC SETUP button 8
Make recording settings.
PLAY SETUP button 8
Make playback settings.
SYNC T/C button
8
Make synchronization and timecode settings.
REMOTE SETUP button 8
Make settings for external remote control.
AUDIO I/O button 8
Make settings related to the input and output
audio signals.
METER SETUP button 8
Make level meter settings.
SYSTEM SETUP button
8
Make system settings.
VERSION INFO button 8
View the system version.
BROWSE button 8
View and perform operations on the folders and
files on CF cards and USB memory.
MEDIA MANAGE button 8
Perform operations, including copying and
formatting, on CF cards and USB memory.
OPERATION MODE button 8
Set the operation mode.
Recording settings (REC SETUP)
The
REC SETUP
screen has three tabbed pages:
REC
MODE
,
FILE FORMAT
and
OPTIONS
.
Touch a tab at the bottom of the screen to open the
corresponding page.
REC MODE page
Make settings related to the recording mode.
Confidence Monitor
Turn the confidence monitoring function, which
allows immediate playback of the recorded signal for
monitoring, ON (default) or OFF.
To use the confidence monitoring function, however,
the sampling frequency and number of tracks must be
set as follows.
Fs (sampling frequency) 44.1k, 48k, 48k–0.1% or
48k+0.1%
REC Mode Single
NOTE
If the current project Fs setting is 88.2k, 96k, 176.4k or
192kHz, or REC Mode is set to Mirror, the Confidence
Monitor setting will be fixed to OFF.
REC Mode
Single The unit records only to the currently selected CF
card (default).
Mirror The unit records to both CF cards simultaneously.
NOTE
If the current project Fs setting is 88.2k, 96k, 176.4k or
192kHz, or Confidence Monitor is set to ON, the REC Mode
setting will be fixed to Single.