Teac HS-2000 - Manual (Page 55)

TASCAM HS-2000
55
7 – Timeline mode
5. When a confirmation pop-up message appears, touch
the
OK
button or press the DATA dial to create the
new AES31 data information file with the input name.
NOTE
If the a file with the same name already exists, a pop-
up window warns, “This name already exists.” Touch the
CLOSE
button to return to the
AES31 NAME
screen,
and enter another name.
Importing all takes
Importing all takes clears the current timeline, and
imports the AES31 editing information of all takes in the
current session folder.
Each take is imported to the timeline at the timecode
value set for the take. If a timecode value is not set, the
take is imported to the beginning of the timeline (00 h 00
m 00 s 00 f).
NOTE
Takes are imported in take list order. If takes overlap, the
take added later will be played back in the overlapping
regions. If two takes overlap completely, the take closer to
the end of the list will be played back.
1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch the AES31 file name display button on the
Home Screen to open a pull-down menu.
3. Touch the IMPORT ALL TAKES button on the pull-down
menu item.
4. A confirmation pop-up will appear.
Touch the
OK
button or press the DATA dial to clear
the current timeline and import all the takes from the
current session folder.
Touch the
CANCEL
button to return to Home Screen.