Teac HS-2000 - Manual (Page 81)

TASCAM HS-2000
81
9 – Playlist mode
In this chapter, we explain how to use the unit when it’s
in playlist mode (See “Selecting the operation mode” on
page 47.)
Please refer to “4–Basic operation” on page 29 when
reading this chapter.
Playlist operations
Loading projects and sessions
Takes and files can only be added to the playlist from the
folder of the currently loaded session. When takes and
files from other session folders are added to a playlist,
they are first copied to the current session folder. Load the
session first.
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the w button next to the project that you want
to select to open the session selection screen.
If the selected project is not the current project, a pop-
up window appears confirming that you want to load
it. Touch the
OK
button.
3. Touch the name of the session to select it.
Its background appears yellow.
4. Touch the
MENU
button on the session selection
screen to open a pull-up menu.
5. Touch the
LOAD
button in the pull-up menu.
NOTE
You can also load a session by pressing its w button. In
this case, if it is not the current session, a pop-up window
appears confirming that you want to load it. Touch the
OK
button.
6. When a confirmation pop-up appears, touch the
OK
button or press the DATA dial.
When loading completes, the last loaded playlist
(or a playlist created by default for a new session) is
automatically loaded and the Home Screen reopens.