Teac HS-2000 - Manual (Page 25)

TASCAM HS-2000
25
3 − Preparations
Security screws
The included security screws can be used to lock the CF
card slot cover.
Use a Phillips head screwdriver to install or remove the
screws.
About the display
Adjusting the display angle
Push the LCD TILT button to unlock the display, and then
pull the bottom of the display forward to adjust the angle.
Pull the bottom of the display until you hear a clicking
sound.
To restore it to its flat position, push the LCD TILT button
again to unlock the display, and push the bottom of the
display. Push the bottom of the display until you hear a
clicking sound.
CAUTION
Do not push the display screen itself.
Adjusting display and indicator
brightness
Turn the DATA dial while pressing and holding the
HOME key to adjust the brightness of the color display,
the PAUSE, REC, PLAY and ON LINE keys, and the JOG
[SHUTTLE], SLOT 1 and SLOT 2 indicators. Push and turn
the DATA dial while pressing and holding the HOME key
to adjust only the brightness of the color display.
Cautions related to display use
The display can easily be scratched, so do not use •
pointed objects, including fingernail tips, to touch it.
Always touch it with your fingers.
Do not press the display forcefully with a finger
•
or poke it with a pen, toothpick or other pointed
object. Doing so could scratch the display or cause
malfunction.
The display touch screen is constructed of a film and
•
glass. Do not apply strong force to its surface. Doing
so could break the glass.
When using the display, do not put a hand on the
•
panel or push around the display forcefully. Doing so
could prevent accurate position detection.
Do not place anything on top of the display or
•
otherwise put weight on the same place for a long
time. Doing so could cause the panel to warp or
result in inaccurate position detection.
Do not apply a commercially-available screen
•
protection film to the display. Doing so could prevent
normal operation.
Gently wipe the display with a soft dry cloth that
•
does not shed dust (e.g. a cleaning cloth). Avoid
wiping with a stiff cloth or rubbing with force. Doing
so could damage the surface of the LCD. Do not
use benzene, thinner, manicure remover, alcohol or
similar substances.
NOTE
The display is produced with extremely high-precision
manufacturing technologies, and 99.99% or more of
the pixels are effective, but sometimes pixels might not
appear or might appear as red or black dots. This is not a
malfunction.