Teac HS-2000 - Manual (Page 93)

TASCAM HS-2000
93
9 – Playlist mode
4. Select the Fade In, Fade Out or Level knob, and turn
the DATA dial to change the value.
Setting ranges:
Fade In / Out Length: 0–30 seconds
(0.1 second per step or 1.0 second per step when the
dial is pressed and rotated)
Level: -∞ to +10dB
NOTE
When the length of the fade-in or fade out is changed, •
the value is automatically adjusted to stay within the
length set by the playback start and end time.
The playback level is shown by the solid red line. •
The nominal level (0dB) is shown by the dotted orange •
line.
Playback on ADJUST screens
You can use the transport controls while on an ADJUST
XXX
screen to play a take while you are adjusting its
settings.
Operation is the same as during normal transport •
operation expect that the. or / keys are used
to jump to the file beginning, Start Point, End Point
and file end.
If you change the Start Point or Fade In Length, the
•
playback point will move to the Start Point. If you
change these during playback, playback will resume
after the playback point has moved.
If you change the End Point or Fade Out Length, the
•
playback point will move to the point below. If you
change these during playback, playback will resume
after the playback point has moved.
PREVIEW OFF PREVIEW ON
When
changing End
Point
Two seconds
before End Point
Two seconds
before Fade Out
start point
When
changing Fade
Out Length
Two seconds
before Fade Out
start point
Two seconds
before Fade Out
start point
Touch the • PREVIEW
button to change how
playback occurs on the
ADJUST XXX
screen.
Playback when PREVIEW is OFF
The original audio is played back without being •
affected by the Fade IN/OUT and Level Adjust
settings.
You can move out of the range between the Start
•
and End Points.
When the End Point is reached during playback, the
•
playback position jumps back to the Start Point and
stops.
Press the
•
PLAY key to start playback from the Start
Point.
Move to positions after the End Point by using
•
the , key, / key, SHIFT+/ key and JOG/
SHUTTLE dial.
Playback when PREVIEW is ON
Only the range between the Start and End Points is •
played back. Locating to points outside this range is
not possible.
The audio is played back with the Fade IN/OUT and
•
Level Adjust settings applied.