Editing playback starting times, Editing lengths and levels of fade-ins/outs, 9 – playlist mode – Teac HS-2000 User Manual

Page 92: Editing lengths and levels of fade-ins/ outs

Advertising

TASCAM HS-2000

9 – Playlist mode

Editing playback starting times

1. Press the HOME key on the front panel to open the

Home Screen.

2. Touch a file name or title name and then touch the

ADJUST ENTRY

button in the pull-down menu to

open the

ADJUST XXX

screen (“

XXX

” is the entry

number).

NOTE

When a take is selected on the

ENTRY

screen or one

of the key assign buttons on the left is selected on the

ASSIGN file screen, you can also open the

ADJUST

screen by touching the

button and then touching

the

ADJUST

button in the pull-up menu.

3. Touch the

Start TC Fade/Level

tab to open

the page shown below. The value shown next to the

Start TC item is the playback starting time for the

selected entry.

4. Touch the

EDIT

button to open the

EDIT START

T/C

screen, and use the number buttons to change

the Start TC.

Use the

FRAME EDIT

button on the

EDIT START

T/C

screen to set whether or not you will edit the

frame value.

5. Use the number buttons to input the playback starting

time.

If you begin input without selecting a unit, input will

•

start from the smallest one.

To input a specific unit, touch it to make its background

•

yellow, and then use the number buttons and the

DATA dial to enter two digits at a time.

Touch the

•

CURRENT

b button to copy the current

timecode to the input value.

Touch the

•

CLEAR

button to reset all values to 00.

7. Touch the

ENTER

button to confirm the setting.

TIP

You can also use the

•

PLAY key and other transport

keys while listening to the audio to find a location, and

then touch the

CURRENT

b button to input that

value.

This can also be edited using an external keyboard.

•

Press the keyboard’s ESC key to clear all values (set

•

them to 00).

Editing lengths and levels of fade-ins/

outs