Teac HS-2000 - Manual (Page 34)

34
TASCAM HS-2000
4 – Basic operation
Using online functions
Turn the ON LINE key ON to enable sound to be output
through the output connectors. (The ON LINE key on the
front panel has a cover, so open this cover to press it.)
The ON LINE key lights when ON.
You can also connect a TASCAM HS32PD/RC-HS20PD
remote controller (sold separately), for example, and use
its master fader to adjust the level suitably. When the
master fader is lowered completely, sound is not output
from the output connectors.
Press the ON LINE key again to turn it OFF. That switch
becomes unlit, and sound ceases to be output from the
output connectors.
For details about the online function, see “Online function”
on page 129.
Recording operation limitations
With this unit, recording to a folder can become
impossible when the total number of files, subfolders and
other items in that folder becomes large. For this reason,
the following things might occur.
When the total number of items in one folder exceeds 0
about 20,000
Recording of a new take might not be possible when
starting from a stopped state. In addition, when a
project or session is loaded, recording to that session
might not be possible. In these cases, the following
pop-up message appears.
When recording/editing is repeated in timeline mode 0
and the available memory space is insufficient
Repeated recording and editing can result in a
shortage of available memory necessary to manage
regions and editing history. In this case, recording
cannot be performed, and the following pop-up
message appears.
In this case, Rec Limit appears for the remaining
recording time for the currently selected card on the
Home Screen.
CAUTION
The total number of items inside one folder includes
files and folders not created by this unit. Management
files, system files and other files and folders that are not
ordinarily visible are also included in the total.