Verilink 8100A (34-00237) Product Manual - Manual (Page 144)

4-70 8 0 0 0 S e r i e s
Display Statistics
1 Type “D” to display CopperCom statistics.Clear CopperCom Statistics
2 Type “A” to reset CopperCom statistics. The IAD sets the statistics to zero
and redisplays the CopperCom Statistics menu.
Press Escape to return to the CopperCom Call Control menu.
Clear Statistics
Type “C” to clear CopperCom statistics.
Configure Type “C” on the CopperCom Call Control menu to display the CopperCom
Configuration menu.
Figure 4.82 CopperCom Configuration Menu
Each option on this menu is described in detail below.
Display Configuration
Type “D” on the CopperCom Configuration menu to display the current
configuration settings.
Compression Format
To set compression globally or by port, follow the steps below.
1 Type “C” on the CopperCom Configuration menu to set the compression
format.
2 Type the port number, or type “0” to set the compression for all ports. The
IAD displays a port prompt.
3 Type the option for the selected compression. The IAD saves the changes
and redisplays the menu.
4 Press Escape to return to the CopperCom Configuration menu and continue
configuration.
Framing Format
1 Type “F” on the CopperCom Configuration menu to display a CopperCom
Configuration menu with Frame Relay Mode options: