Verilink 8100A (34-00237) Product Manual - Manual (Page 223)

C o m m a n d L i n e I n t e r f a c e 6-3
help [<partial or specific command>]
ping Pings an IP address. The IP address must be on the same subnet. Press Escape
to premature halt the test. Upon termination, displays a summary table.
ping <ip-address> [<size-of-pings>]
[<number-of-pings>]
ip-address
IP address of destination in decimal format (999.999.999.999).
size-of-pings
Packet size, in number of bytes (0-1450, default 32).
number-of-pings
Number of attempts (0-1000, 0 is continuous; default 4 tries).
register port Used to register the VoIP port with the Proxy.
register port (<port>|all)
remove lan ip
address
Removes the LAN IP address. If you do not enter any optional parameters,
the IAD locates and removes the first available slot, interface, port, and
connection.
remove lan ip address <ip-address> <net-mask> [<slot>
[<interface> [<port> [<connection>]]]]
ip-address
IP address to remove, in decimal format (999.999.999.999).
net-mask
Subnet mask in decimal format (255.255.255.255).
remove wan ip
address
Removes the WAN IP address. If you do not enter any optional parameters,
the IAD locates and removes the first available slot, interface, port, and
connection.
remove wan ip address <ip-address> <net-mask> [<slot>
[<interface> [<port> [<connection>]]]]
ip-address
IP address to remove, in decimal format (999.999.999.999).
net-mask
Subnet mask in decimal format (255.255.255.255).
rename file Changes the name of a file.
rename file <old-filename> <new-filename>
old-filename
File name of existing file.
new-filename
New name of file.
reset system Performs a soft system reset.