Verilink 8100A (34-00237) Product Manual - Manual (Page 147)

C o n f i g u r a t i o n 4-73
Debugging The use of this option is reserved for Verilink network engineers only.
Enabling debug options may significantly affect IAD performance.
Statistics Type “S” on the AAL2/LES CCS-ELCP menu to display the AAL2 Channel
Statistics menu:
Figure 4.87 AAL2 Channel Statistics Menu
Display AAL2 Channel Statistics
Type “D” to display the AAL2 Channel (Audio and Alarm) Statistics. Press
Escape to return to the menu. Press C to reset the statistics, or press any other
key to refresh the statistics and display them again.
Clear AAL2 Channel Statistics
Type “C” to reset the AAL2 channel statistics.
MGCP 1.0 (Supported Only in VoIP versions as denoted by an “s” in
the Model Number)
You may select Manage MGCP Embedded Client by typing “O” on the Main
menu (Figure 2.2) to display the MGCP Management menu (Figure 4.88).
NOTICE: The IAD only displays option “O” to manage VoIP embedded client on
the main menu. The embedded client can be either MGCP or SIP.
Figure 4.88 MGCP Management Menu
The following information is used to configure MGCP:
• DNS name or IP address for a Media Gateway Controller (or Notified Entity)