Verilink 8100A (34-00237) Product Manual - Manual (Page 77)

C o n f i g u r a t i o n 4-3
Figure 4.1 WAN Configuration Flowchart
Setting the WAN Port IP Address
Before you configure the WAN port IP address, you must get the proper IP
address and subnet mask address identified for Internet access by your
network administrator.
1 Type “2” on the Main menu (Figure 2.2). The IAD displays the Router
Configuration menu (Figure 2.3).
2 Type “C” to select Configure Port IP Address. The IAD displays the
available interfaces, which depend on the specific IAD as shown in Figure
2.4 and Figure 2.5.
System Defaults
Physical
Interface
Data Link
ATM Options ATM
Define
PVCs
Frame
Relay
FR Options
Define
DLCIs
Bridge
IP over Bridge
IP
Voice
Select
Voice
Gateway
Configure
Voice
App.
Data Data
Bridge
IP over Bridge
IP
Voice
Select
Voice
Gateway
Configure
Voice
App.