Verilink 8100A (34-00237) Product Manual - Manual (Page 255)

S p e c i f i c a t i o n s B-3
E1
Network Interface: RJ-48
Line Rate: 2.048 Mbps (
±50 bps) unframed
Line Framing: CAS or CCS, with or without CRC4
Line Code: HDB3
Input Signal: E1, +1 to
−27 dB
Connection: RJ-48 jack at 120
Ω (±10 %)
Output Signal: 3.0 V (
±10 %) base-peak into 120 Ω
with protection
Transient Voltage: 1000 V protection, fused input / output
Jitter Control: per G.823 Sections 2.1 and 3.0
Ones Density: HDB3; complies with G.701 and G.703
T1/E1 Provisioning (8208s Only)
Provisioning: Fractionally multiplexed voice and data
(s-version only)
Programming: On a DS0 basis
ATM
Adaptation Layers: AAL2 (voice), AAL5 (data), AAL5 (for
layer 3 voice)
Encapsulation: RFC 1483 multiprotocol encapsulation
over ATM; RFC 2364 (PPP over ATM);
ITU 366.1, ITU 366.2 (AAL2)
AAL2 Profiles (non-“s” Version): ATM: 9, 10, 11, and ITU:1
AAL2 Profiles (“s” Version): ATM: 7, 8, 9, 10 11, 12, and ITU: 1, 2
Voice: Single AAL2 PVC
Data: Up to 8 AAL5 PVCs
Security: Software-configurable payload scrambling
Voice QoS: CBR
Data QoS: CBR, UBR
OAM Cell Handling: F4/F5 segment and end-to-end loopbacks
Frame Relay
Encapsulation: RFC 1490 multiprotocol encapsulation
over Frame Relay
Voice: Single PVC
Data: 8 Data Link Identifiers (DLCIs)
Data Link Format: Q.922
Data Link Control: FRF.12 support, CMCP
Framing: HDLC support