HEIDENHAIN iTNC 530 (340 49x-05) Pilot User Manual
Page 135
Advertising
![background image](/files/816376/content/doc135.png)
135
Definin
g
Machining Operations
Unit 140 Tilt plane (FCL 2 function)
With unit 140 you can define tilted working planes in various ways. You
can set the plane definition and positioning behavior separately.
The machine manufacturer must enable the functions for
tilting the working plane!
You can only use the PLANE function on machines that have
at least two tilting axes (head and/or table). Exception: The
PLANE AXIAL
function (FCL 3 function) can also be used if only
a single rotary axis is present or active on your machine
Advertising
This manual is related to the following products: