HEIDENHAIN iTNC 530 (340 49x-05) Pilot User Manual
Page 143
143
Definin
g
Machining Operations
Unit 60 M-function unit
You can define any two miscellaneous functions M with this unit.
Parameters:
M function: Input of any miscellaneous functions M
Unit 50 Separate Tool Call
You can define a separate tool call with this unit.
Parameters in the overview form:
T
: Tool number or name (switchable via soft key)
S
: Spindle speed [rpm] or cutting speed [m/min or ipm]
DL
: Delta length for tool T
DR
: Delta radius for tool T
DR2
: Delta radius 2 (corner radius) for tool T
Define M function: If desired, enter any miscellaneous functions M
Define pre-positioning:
If desired, enter a position to be approached
after the tool change. Positioning sequence: First the machining plane
(X/Y), then tool axis (Z).
Tool preselect
: If needed, this is the number of the next tool for faster
tool change (machine-dependent)