HEIDENHAIN iTNC 530 (340 49x-05) Pilot - Manual (Page 8)

8
Quick Guide
Defining drilling
 Select drilling: Press the UNIT 205 soft key. The TNC
displays the form for drilling operations
 Specify tool: Press the soft key SELECT, the TNC displays
the contents of the tool table TOOL.T in a pop-up window
 Move the highlight with the cursor keys onto the NC drill and
enter it into the form with the ENT key.
 Enter the spindle speed and confirm entry with the ENT key
 Enter the drilling feed rate and confirm entry with the ENT
key
 Enter the drilling depth and confirm entry with the ENT key
 Enter plunging depth, save the form with the END key
You do not need to define the drilling positions again. The
TNC automatically uses the previously defined positions, i.e.
those defined for the centering operation.