HEIDENHAIN iTNC 530 (340 49x-05) Pilot - Manual (Page 78)

78
Definin
g
Machining Operations
Additional parameters on the drilling parameters detail form:
 Depth at front: Depth for sinking at front.
 Offset at front: Distance by which the TNC moves the tool center
out of the hole during countersinking at front.
Globally effective parameters on the global data detail form:
 Set-up clearance
 2. Set-up clearance
 Positioning feed rate
 Feed rate for traversing between machining positions
 Climb milling, or
 Up-cut milling