HEIDENHAIN iTNC 530 (340 49x-05) Pilot User Manual
Page 63
Advertising
![background image](/files/816376/content/doc063.png)
63
Definin
g
Machining Operations
Unit 201 Reaming
Parameters on the overview form:
T
: Tool number or name (switchable via soft key)
S
: Spindle speed [rpm] or cutting speed [m/min or ipm]
F:
Reaming feed rate [mm/min] or FU [mm/rev]
Depth:
Reaming depth
Machining positions (see “Defining Machining Positions” on page
145.)
Additional parameters on the tool detail form:
DL
: Delta length for tool T
M function
: Any miscellaneous function M
Spindle
: Direction of spindle rotation. As a default, smarT.NC sets M3
Tool preselect
: If needed, this is the number of the next tool for faster
tool change (machine-dependent)
Advertising
This manual is related to the following products: