Selecting the new operating mode the first time – HEIDENHAIN iTNC 530 (340 49x-05) Pilot User Manual
Page 18
18
Fun
damentals
Selecting the new operating mode the first time
Select the smarT.NC operating mode: The file manager of
the TNC appears.
Select one of the available example programs with the
arrow keys and press ENTER, or
In order to write a new machining program, press the NEW
FILE soft key. smarT.NC opens a pop-up window.
Enter a file name with the extension .HU, and confirm with
ENT.
Confirm with the MM (or INCH) soft key or screen button.
smarT.NC creates an .HU program with the selected units
of measurement and automatically inserts the program
header form.
The data for the program header form are mandatory, since
they are globally valid for the entire machining program. The
default values are specified internally. Change the data if
necessary, and save them with the END key.
In order to define machining steps, press the EDIT soft key
to select the desired machining step.