HEIDENHAIN iTNC 530 (340 49x-05) Pilot User Manual
Page 162
162
Definin
g Machining Po
sitions
Pattern, straight, rotated or distorted
Starting point 1st axis
: Coordinate of the starting point
of the pattern (
1
) in the major axis of the working plane.
Starting point 2nd axis
: Coordinate of the starting point
of the pattern (
2
) in the minor axis of the working plane.
Distance in 1st axis
: Distance of the machining positions
in the major axis of the working plane. You can enter a
positive or negative value
Distance in 2nd axis
: Distance of the machining positions
in the minor axis of the working plane. You can enter a
positive or negative value
Number of lines
: Total number of rows in the pattern
Number of columns
: Total number of columns in the pattern
Rotation
: Angle of rotation by which the entire pattern is
rotated around the entered starting point. Reference axis:
Major axis of the active machining plane (e.g. X for tool axis
Z). You can enter a positive or negative value
Rotary pos. ref. ax.
: Angle of rotation around which only
the major axis of the machining plane is distorted around the
entered starting point. You can enter a positive or negative
value.
Rotary pos. minor ax.
: Angle of rotation around which only
the minor axis of the machining plane is distorted around the
entered starting point. You can enter a positive or negative
value.
The Rotary pos. ref. ax. and Rotary pos. minor ax.
parameters are added to a previously performed rotation of
the entire pattern.