HEIDENHAIN iTNC 530 (340 49x-05) Pilot User Manual
Page 68
Advertising
![background image](/files/816376/content/doc068.png)
68
Definin
g
Machining Operations
Additional parameters on the drilling parameters detail form:
Angle of spindle:
Angle at which smarT.NC positions the tool before
it is plunged into or retracted from the bore hole.
Dwell time
: Dwell time at counterbore floor
Globally effective parameters on the global data detail form:
Set-up clearance
2. Set-up clearance
Feed rate for positioning
Feed rate for traversing between machining positions
Advertising
This manual is related to the following products: