HEIDENHAIN iTNC 530 (340 49x-05) Pilot User Manual
Page 161
161
Definin
g Machining Po
sitions
Single point, Cartesian
X:
Coordinate in the reference axis of the working plane
Y:
Coordinate in the minor axis of the working plane
Single row, straight or arced
Starting point 1st axis
: Coordinate of the starting point
of the row in the reference axis of the working plane.
Starting point 2nd axis:
Coordinate of the starting point
of the row in the minor axis of the working plane.
Distance:
Distance between the machining positions. You
can enter a positive or negative value
Number of positions:
Total number of machining positions.
Rotation
: Angle of rotation around the entered starting
point. Reference axis: Major axis of the active machining
plane (e.g. X for tool axis Z). You can enter a positive or
negative value