SMA SC 500CP-10-JP - Manual (Page 103)

SMA Solar Technology AG 12 Parameters
User Manual SCCP-JP-BA-A4-en-12 103
12.2 Sunny Central String-Monitor Controller
PVStrT Timer: once the specified time has
elapsed, the Sunny Central switches
from the operating state "Grid
monitoring" to the operating state
"Grid monitoring time reached"
1 s to 300 s ‒ 90 s
QoDInvCurPv** Minimum allowed reverse current to
PV array
− 1,600 A to
0 A
‒ − 60 A
Serial number** Serial number of the Sunny Central 0 to
2147483647
‒ 0
SpntRemEna Remote activation of the system Stop Deactivated Run
Run Activated
TmSet Time 0 to 235959 hhmmss ‒
TmZn Time zone GMT ‒12:00 to
GMT 12:00
Configurable time
zones
GMT 9:00
VArGra*** Gradient of reactive power change 0%/s to
200%/s
‒ 20 %/s
* To view or change this parameter, you must enter the installer password.
** This parameter can only be viewed.
*** To change this parameter, you must enter the installer password.
Name Description Value/range Explanation Default
value
Serial number Display of serial number ‒ Value cannot be
changed
−
Firmware Firmware version of operation
control unit
0 to 255.0 ‒ −
Firmware2 Firmware version of digital
signal processor
0 to 255.0 ‒ −
Dt Date entry 20060101 to
20991231
Entered in the format
YYYYMMDD
−
Tm Time entry 0 to 235959 Entered in the format
HHMMSS
−
TolGr1* Deviation of group 1 currents
from mean value
5% to 100% Parameter exists for all six
groups.
13%
MoniTmGr1On* Start time for group 1
monitoring
7:00 a.m. to
7:00 p.m.
Parameter exists for all six
groups.
10.00
a.m.
MoniTmGr1Off* Stop time for group 1
monitoring
7:00 a.m. to
7:00 p.m.
Parameter exists for all six
groups.
3:00 p.m.
MoniTmGrAllOn* Start time for monitoring of all
groups
7:00 a.m. to
7:00 p.m.
‒ 10:00
a.m.
MoniTmGrAllOff* Stop time for monitoring of all
groups
7:00 a.m. to
7:00 p.m.
‒ 3:00 p.m.
Name Description Value/range Explanation Default value