SMA SC 500CP-10-JP - Manual (Page 91)

SMA Solar Technology AG 12 Parameters
User Manual SCCP-JP-BA-A4-en-12 91
P-WGra** Gradient of power
reduction
1%/Hz to 100%/Hz ‒ 40%/Hz
PFAbsMin* Limitation of the
displacement power
factor cos φ
0.5 to 1 The parameter should not
fall below 0.8 in normal
operation.
0.9
PF-PF Displacement power
factor cos φ
The lower limit is
defined by the
parameter PFAbsMin.
0.5 to 1 The parameter should not
fall below 0.8 in normal
operation.
1
PF-PFExt Excitation of the
displacement power
factor cos φ
OvExt Lagging OvExt
UnExt Leading
PF-PFStr** Displacement power
factor cos φ at
characteristic curve
point 1
The lower limit is
defined by the
parameter PFAbsMin.
0.5 to 1 The parameter should not
fall below 0.8 in normal
operation.
0.9
PF-PFExtStr** Excitation of the
displacement power
factor cos φ at
characteristic curve
point 1
OvExt Lagging OvExt
UnExt Leading
PF-PFStop** Displacement power
factor cos φ at
characteristic curve
point 2
The lower limit is
defined by the
parameter PFAbsMin.
0.5 to 1 The parameter should not
fall below 0.8 in normal
operation.
0.9
PF-PFExtStop** Excitation of the
displacement power
factor cos φ at
characteristic curve
point 2
OvExt Lagging OvExt
UnExt Leading
PF-WStr** Specification of feed-in
power in % at
characteristic curve
point 1
0% to 90% ‒ 0%
PF-WStop** Specification of feed-in
power in % at
characteristic curve
point 2
10% to 100% ‒ 100%
Name Description Value/range Explanation Default
value