SMA SC 500CP-10-JP - Manual (Page 87)

SMA Solar Technology AG 11 Instantaneous Values
User Manual SCCP-JP-BA-A4-en-12 87
11.1.4 Internal Device Values
11.1.5 Internal Meters
11.1.6 Service-Relevant Display Values
Display values that are only relevant to SMA Solar Technology are listed below.
Name Description
Cntry Country setting or configured standard
DInExlStrStp Status of remote shutdown unit
DInGfdi Status of GFDI
DInKeySwStrStp Status of key switch
DOutMntSvc Status of signal light
Dt Date
Firmware Firmware version of operation control unit
Firmware 2 Firmware version of digital signal processor
Tm Time
Type Device type
Name Description
CntFanCab1* Operating hours of interior fan 1, in h
CntFanCab2* Operating hours of interior fan 2, in h
CntFanHs*
* These instantaneous values are only visible after entering the installer password.
Operating hours of heat sink fan, in h
CntFanTrf1 Operating hours of transformer fan 1, in h
CntFanTrf2 Operating hours of transformer fan 2, in h
CntGfdiSw Number of GFDI trippings
CntHrCab1* Operating hours of heating element 1, in h
CntHtCab2* Operating hours of heating element 2, in h
E-Today Energy fed into the grid during the current day, in kWh
E-total Total energy fed into the grid, in kWh
h-HighV Operating hours at high DC voltage
h-On Operating hours (feed-in time and waiting time) of the inverter, in h
h-Total Feed-in hours (feed-in time without waiting time) of the inverter, in h
Name Name
BfrSolIrr Firmware-3
CardStt Firmware-4
ExtSollrr Firmware-5
Fb_SVMMode Firmware-6