SMA SC 500CP-10-JP - Manual (Page 106)

12 Parameters SMA Solar Technology AG
106 SCCP-JP-BA-A4-en-12 User Manual
Command** Stop Contact the SMA Service
Line if you wish to use this
function.
0
Meas
Offset1
Offset2
Diag
Reset Err.Cnt.
StoreCalibData
LoadCalibData
Watchdog test
Surge arrester1* Alarm contact
(e.g. theft protection for
Sunny String-Monitor)
Active high Contact activated when
voltage present
0
Active low Contact activated when
no voltage present
Deactivated Contact deactivated
Surge arrester2* Alarm contact Active high Contact activated when
voltage present
0
Active low Contact activated when
no voltage present
Deactivated Contact deactivated
* To change these parameters, you must enter the installer password.
** These parameters are only visible after entering the installer password.
Name Description Value/range Explanation Default
value