Precision Digital PD6730X - Manual (Page 44)

PD6730X Vantageview Super Snooper Modbus Scanner Instruction Manual
44
PV Display Setup (PVSETUP)
The PV Display Setup menu is used to configure the display options for each Modbus PV setup in the PV
Number Configuration
(PV NUM) menu on page 37. For each Modbus PV, this includes selecting the top
or bottom display, entering tag and unit, setting the Float data type decimal location (for Float data types
only), setting the display decimal point location, and scaling the Modbus PV to display as engineering
units.
Note 1: The Float Decimal Point menu only appears if the PV data type has been set to Float.
Note 2: Not applicable to feet and inches display models.
Modbus PV Display Format (FORMAT)
The PV Display Setup menu is used to configure the display options for each Modbus PV.
Decimal Display Models
The PV may appear on the top display (TOPDSP) or bottom display (BOTDSP). The PV may
also be turned off (OFF), and will not display; though it may be used in math functions, and the
data will be polled if in Modbus Master Mode.
Feet and Inches Display Models
The PV may appear on the top feet and inches display with 1/16 of an inch (FtIn16), 1/8 of
an inch (FtIn8), or appear on the 7-digit bottom display (DEC) with no decimal points. The PV
may also be turned off (OFF), and will not display; though it may be used in math functions,
and the data will be polled if in Modbus Master Mode.
Press Enter to access the Format menu and Up button to scroll through choices. Press Enter to make a
selection and proceed to the next menu.
Press the Menu button to back out of a menu, or hold the Menu button to exit at any time.
Enter Modbus PV Tag (TAG)
Each Modbus PV may have a unique programmable tag to identify the PV while the display is scanning.
To program the Modbus PV tag, select the Tag menu and press Enter.
Program the custom tag as described in Setting Alphanumeric Labels on page 24. When the label has
been programmed, press Enter to confirm the label and leave the Tag parameter.
Press the Menu button to back out of a menu, or hold the Menu button to exit at any time.
Note 1
Note 2