Precision Digital PD6730X - Manual (Page 84)

PD6730X Vantageview Super Snooper Modbus Scanner Instruction Manual
84
System (SYSTEM)
The system function is used to set the real time clock, set daily data log times, enable/disable the
backlight, access analog output controls used in troubleshooting, store, restore, and backup restore
feature, enable/disable the battery power alert symbol on the display, and review basic system
identification information.
Set Real Time Clock (SETTIME)
The real time clock is used to trigger data log events, and is recorded at every logged data point. The Set
Time
menu displays the date and time.
Figure 14: Real Time Clock Display Example – Decimal Display Model
Figure 15: Real Time Clock Display Example – Feet & Inches Display Model
The above display examples show the date to be June 27, 2013; at 14 hours, 32 minutes, and 36
seconds.