Precision Digital PD6730X - Manual (Page 82)

PD6730X Vantageview Super Snooper Modbus Scanner Instruction Manual
82
Custom (CUSTOM)
The Custom menu is used to modify the initial programming menus that appear in the Main Menu when
the Menu button is pressed in Run Mode.
CAUTION
Changing the default menu setup with the Custom menu feature may change the setup
and operation procedures described in this manual. Only operators familiar with the
programming and operation of this unit should use this feature.
Eight menu positions are available. Menu positions 6 and 7 are factory programmed for Setup and
Advanced
.
After pressing Enter at the Custom menu, the
display will flash Position (POS 1) and then
display the parameter to appear in position 1 of
the main menu.
To add a menu or parameter to the menu
structure, or change the default menus, press
Enter
at the desired position (POS) to be edited,
and use the Up or Right arrows to select the
desired menu item for that position. Press Enter
to save the setting. See page 83 for a complete
list of the available menu selections for each
position.