TA Triumph-Adler DC 2060 - Manual (Page 107)

System Settings
3-7
4 Press [Close]. The touch panel will return to the Copy Default screen.
Correcting Fine Black Line
If the copied image has black streaks (dirty streaks not present on the original), you can configure
the copier to make them less noticeable. It is recommended that this mode is left switched off for
regular use which the normal fine lines must be reproduced as close to the original as possible.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Correct. fine
black line and press [Change #].
3 Select [On] or [Off].
4 Press [Close]. The touch panel will return to the Copy Default screen.
Selecting Paper
Specifies whether the copy paper is automatically selected according to the size of the original
document or the copy paper in the default cassette is forcibly selected.
1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [S] or [T] to select Select Paper
and press [Change #].
3 Choose [APS (automatic paper
selection)] or [Default drawer] ([Default
cassette]).
System Menu / Counter
System Menu
Copy Default
Default menu Setting mode
Correct. fine black line. Change # Off
EcoPrint Off
Original Image Quality Text + Photo
Background exp. adj. Standard
Thin Line adjustment 4
Correct. fine black line.
System Menu Copy Default
This function able to be unremarkably
on black line of image.
Back
Off
On
-
System Menu / Counter
System Menu
Copy Default
Default menu Setting mode
Correct. fine black line.
Select Paper Change #
Off
APS
EcoPrint Off
Background exp. adj. Standard
Thin Line adjustment 4
Select Paper
System Menu Copy Default
Set auto paper selection mode.
Back
APS
Default
drawer
-