TA Triumph-Adler DC 2060 - Manual (Page 146)

System Settings
3-46
4 To name the box, select Box name and
press [Change #].
5 Enter the box name and press [End].
For instructions on entering characters, refer to Entering Characters When Using Document
Management Functions on page 3-58.
6 Specify the password to the box. Select
Password and press [Change #].
7 Use the numeric keys to enter the
password and press [Close].
NOTE: The password should be a
number up to 8 digits.
If you prefer not to specify a password,
press [Clear]. Press [Enter].
8 Press [Close]. The touch panel will return to the screen as shown in step 3 above. To specify a
name and a password to the other boxes, repeat steps 3 and 8.
9 Press [Cancel]. The touch panel will return to the Document Management screen.
Deleting All Documents in Box
You can delete all documents in the Synergy Print Boxes at once.
1 Access the Document Management screen. (For instructions, refer to Accessing the Document
Management Screen on page 3-42.)
2 Under Synergy Print Box, press [Box
Editing].
Box
Default menu
Change #
Box name
Password
Setting mode
(No register)
System Menu Document Management Box Editing - -
001
Box
Default menu
Change #
Box name
Password
Setting mode
(No register)
System Menu Document Management Box Editing - -
001
Close
Clear
(Enter by #key) Password
password.
Back
Document Management Box Editing 001 - - -
Document Management
Document Management
Print
Reset
Box
Shared Data Box Form box Synergy Print Box
System Menu
Print
Reset
Box
Print
Reset
Box
Document
save term
Box
Editing the list the list the list