TA Triumph-Adler DC 2060 - Manual (Page 41)

Copying Functions
1-35
Booklets from Facing Pages
Delivers booklets, such as a magazine, by adding front and back covers (with or without copying).
The paper source to supply the paper for the cover is specified using the system menu. Refer to
Specifying Cassette for Cover Paper on page 3-9.
NOTE: The supported original sizes and paper sizes are as follows.
If your copier is equipped with the optional document finisher, you can staple the booklet in the
center margin. If the copier is also equipped with a folding unit, you can combine a center margin
with folding at the center. The following paper sizes are supported when stapling the center margin
or combining a center margin with center folding.
Copying on covers
The original for the cover is scanned first. When the finished copies are folded, that page will be
copied onto the front and back covers.
Blank covers
When the finished copies are folded, both the front and back covers will be blank.
Follow the steps as below for this kind of booklet.
1 Place the originals and press [Function].
Original Size Paper Size
Inch models 11 × 17" and 8
1/2
Ч 11" 11 Ч 17", 8
1/2
Ч 14", 11 Ч 8
1/2
" and
8
1/2
× 11"
Metric models A3, B4, A4R, B5R, A5R and 8K A3, B4, A4, A4R, B5 and B5R
Supported Paper Sizes
Inch models 11 Ч 17", 8
1/2
Ч 14" and 8
1/2
× 11"
Metric models A3, B4 and A4R
Originals Copies
Originals Copies