TA Triumph-Adler DC 2060 - Manual (Page 81)

Copying Functions
1-75
Output Destination
Specify the optional document finisher or multi-job tray as the output destination as follows.
1 Press [Edit]. On the next screen, press
[Select of Output].
NOTE: The option to select the output
destination is displayed only if the
copier is equipped with the optional
document finisher or multi-job tray.
The output destination setting applies
to all other steps. Simply complete this
setting once as an initial step.
2 Specify the output destination. Refer to
Output Destination on page 1-49 for
details.
3 Press [Close].
Ready to Job build.
Job Build
Off
Border
Auto
Basic Quality
Page #
Tray A
Off
Edit
1 sided copy-Left
Finished page #:
Step
None
Place originals then press Start key.
Select
Orig.Size
None
Margin/
Centering
Select of
Repeat
Erase Copy
Output
Place originals then press Start key.
Back Select of Output
Ready to Job build.
Select proper output tray to avoid
mixing jobs.
You can confirm output tray with out
management.
Auto
Tray A
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5