TA Triumph-Adler DC 2060 - Manual (Page 18)

Copying Functions
1-12
3 Press [1 staple] or [2 staples].
4 Select the staple position.
5 Place the originals in the document processor or on the platen and press the Start key.
If the original is placed on the platen, Scan next original(s) will be displayed. Place the next original
and press the Start key.
After scanning all originals, press [Scanning finished] to start copying.
Back
Select Original Im
None
1 staple
Direction.
Top Edge
Staple/Punch
Ready to copy.
Punch
2 holes
2 staples
None
Paper Size
11x8½
Staple
100%
Shortcut
3 holes
:maximum capacity
11x8½
Paper Size
Back
Select Original Im
None
1 staple
Direction.
Top Edge 2 staples
Punch
Staple/Punch
Staple
Staple Mode.
Position
Left side
Right side
Top side
None
2 holes
100%
Shortcut
3 holes
50