TA Triumph-Adler DCC 2526 - Manual (Page 118)

Section 6 OTHER CONVENIENT FUNCTIONS
6-70
Making the settings for the first original (“A” in
the illustration on page 6-68.)
Drawer[Cassette] No.2 is to be selected for color paper feed under
the “Select paper” screen.
6
Press the “Select paper” key.
The “Select paper” screen will be displayed.
Inch specifications
Metric specifications
7
Press the key that corresponds to drawer[cassette] No.2.
Press the “Close” key. The touch panel will return to the
screen in step 6.
Inch specifications
Metric specifications
8
Set the first original (“A”) to be copied. Press the [Start]
key.
Scanning of the originals will start.
Step 2: Leaving the back side of the first
original (“A”) blank
9
Press the “Print from Front page” key.
Leaving the back side of the original blank will allow the
next copy to start on the front side of the next page.
Inch specifications
Metric specifications
Step 3: Making the settings for the second
originals (“B” in the illustration on page 6-68.)
Drawer[Cassette] No.3 is to be selected for plain paper feed under
the “Select paper” screen.
10
Press the “Select paper” key.
The “Select paper” screen will be displayed.
Inch specifications
Metric specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
set
End Job Build - Step1
1 sided 2 sided copy
Offset AMS Back Edge
Select
paper
Original
type
1 sided/
2 sided
Finished Reduce
/Enlarge
Orig. set
direction
Insert
page
2 sided copy-Left
Finished page #: 0
Print from
Rear page
Basic Quality Edit
11x8 1 / 2
Ready to Job build.(Full Col.)
Set original. Press Start key.
set
End Job Build - Step 1
1-sided 2-sided Copy
Group AMS Back Edge
Select
paper
Original
type
1-sided/
2-sided
Finished
Reduce/
Enlarge
Orig. set
direction
Insert
blank page
2-sided Copy-Left
Finished page #: 0
Print from
rear page
Basic Quality Edit
Ready to Job build.(Full-color) Set
Back Close
Place originals then press Start key.
Select paper
Plain
Bypass
Plain
Plain
Color
11x8 1 /
2
"
Plain
8 1 / 2 x11"
11x8 1 /
2
"
11x8 1 / 2 "
Ready to Job build.(Full Col.) Set
Back Close
Place originals then press Start key.
Select paper
Plain
Bypass
Plain
Plain
Colour
Plain
set
Cancel Job Build - Step2
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
1 sided 2 sided copy
Offset AMS Back Edge
Select
paper
Original
type
1 sided/
2 sided
Finished
Reduce
/Enlarge
Orig. set
direction
Insert
page
2 sided copy-Left
Finished page #:1
Next copy page: Rear
Print from
Front page
Scanning
finished Basic Quality Edit
11x8 1 / 2
set
Job cancel Job Build - Step2
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
1-sided 2-sided Copy
Group AMS Back Edge
Select
paper
Original
type
1-sided/
2-sided
Finished
Reduce/
Enlarge
Orig. set
direction
Insert
blank page
2-sided Copy-Left
Finished page #:1
Next copy page: Rear
Print from
front page
Scanning
finished Basic Quality Edit
set
Cancel Job Build - Step3
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
1 sided 2 sided copy
Offset AMS Back Edge
Select
paper
Original
type
1 sided/
2 sided
Finished
Reduce
/Enlarge
Orig. set
direction
Insert
page
2 sided copy-Left
Finished page #:2
Next copy page: Front
Print from
Rear page
Scanning
finished Basic Quality Edit
11x8 1 / 2
set
Cancel Job Build - Step3
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
1-sided 2-sided Copy
Offset AMS Back Edge
Select
paper
Original
type
1-sided/
2-sided
Finished Reduce/
Enlarge
Orig. set
direction
Insert
blank page
2-sided Copy-Left
Finished page #:2
Next copy page: Front
Print from
rear page
Scanning
finished Basic Quality Edit