TA Triumph-Adler DCC 2526 - Manual (Page 188)

Section 7 COPIER MANAGEMENT
7-52
3
Select the custom paper type whose setting you want to
change, and then press the “Change #” key.
Inch specifications
Metric specifications
4
If you want to use the paper for duplex printing, press the
[On] key.
Inch specifications
Metric specifications
5
Press the “Close” key.
The touch panel will return to the screen in step 2.
6
Press the “Close” key once again.
The touch panel will return to the “Default setting” screen.
7
Press the “End” key.
The touch panel will return to the contents of the “Basic”
tab.
Auto sleep time
Perform the following procedure to set the amount of time that will
elapse after copying, or if no operation is performed, before the auto
sleep function turns the copier OFF.
1
Display the “Machine default” screen.
(See “Accessing the machine default settings” on
page 7-45.)
Inch specifications
Metric specifications
2
Select “Sleep mode changing time” under the “Default
menu” column on the left side of the touch panel and then
press the “Change #” key.
The “Sleep mode changing time” screen will be displayed.
Inch specifications
Metric specifications
Close
Setting mode Default menu
Select paper type(2sided)
Select paper type(s) for duplex copy.
Custom 1
Custom 7
Custom 6
Custom 5
Custom 4
Custom 3
Custom 2
On
On
On
On
On
On
On
Default setting - Machine default
Change #
Up
Down
Close
Setting mode Default menu
Select paper type(2sided)
Select paper type(s) for duplex copy.
Custom 1
Custom 7
Custom 6
Custom 5
Custom 4
Custom 3
Custom 2
On
On
On
On
On
On
On
Default setting - Machine default
Change #
Up
Down
Close Back
Default setting - Machine default - Select paper type(2sided)
Custom 1
On
Off
Close Back
Default setting - Machine default - Select paper type(2sided)
Custom 1
On
Off
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
End
Default setting / Counter
Default setting
Copy
default
Machine
default
Counter
check
User
Adjustment
Language
Bypass
setting
Register
orig. size
Management
Print
report
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Machine default
Select Copy output mode
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
30 Minute
30 Minute
Top tray
Default setting / Counter
Close
Up
Down
Change #
Setting mode Default menu
Default setting
Machine default
Select COPY output mode
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
30 Minute
30 Minute
Top tray